User Manual

Operating Reference
Alarms
3
A6V10415471_en_a_40 209 | 352
Solid category color and not
flashing.
There are no unprocessed events for
that category.
NOTE: In Client Profiles where
recurring events [➙ 225] are grouped
under a parent container, the event
lamp stops flashing when there are no
unprocessed events in the event
container.
Solid dark category color and not
flashing.
Filter by category activated. There are
no unprocessed events for that
category.
When you move the cursor over an event lamp, a tooltip provides the following
information:
● Total number of events for this category
● Number of unprocessed (unacknowledged) events for this category
● Number of events for this category that have been acknowledged
3.3.3 Event List
The Event List window displays all the detected events with each one on a
separate row. This window is your main starting point for dealing with events. For
instructions, see the step-by-step section.
When opened, Event List displays in the main work area of the user interface
[➙ 7]. When it is closed, depending on the Client Profile Event List may be either
entirely hidden or collapsed to a vertical bar down the left side of the screen.
The display of Event List is limited to 10000 event lines; if such limit is exceeded,
the status bar of Event List will indicate the display limit and the total number of
events detected (for example, 10000 of 50000).