User Manual

Operating Step
-
by
-
Step
Remote Notifications
2
162 | 352 A6V10415471_en_a_40
Re-Send a Remote Notification from the Message Status List
You want to re-send a remote notification that was previously not completed
successfully. For example, its overall outcome was Failed or Aborted. For more
details, see Remote Notifications Message Status List [➙ 331].
1. In System Browser, select Applications > Remote Notifications.
a The RENO Messages tab displays. The Message Status list shows a list of
all the notifications (alarm-triggered or operator-issued) that have been sent
out from Desigo CC.
NOTE: If no remote notifications have been sent out, the RENO Messages
tab does not display.
2. In the Message Status list, select the remote notification that you want to re-
send. (For example, test – Alarm ID:29 – Automatic).
3. Click Start RENO procedure .
a The system starts re-sending the notification. While sending is in progress,
the icon is dimmed.
Start a Remote Notification from Event List
An event has occurred that triggered an alarm-triggered remote notification. The
notification has Starting Mode = Manual, which means operator intervention is
required for the system to start sending out the preconfigured messages.
w Event List displays on the screen.
w An event has occurred for which the command to start remote notifications
is available.
1. In Event List, select the event that triggered the notification.
2. Click Start Remote Notifications for the event.
a The system starts sending the notification messages preconfigured for this
event. The command to stop remote notifications is available for the
event.
Stop a Remote Notification from Event List
Sending of a remote notification is in progress. The notification was configured with
Starting Mode = Manual and Can be stopped = Yes. You now want to interrupt
(halt) sending of the messages.
w You previously started a remote notification from Event List, and the command
to stop remote notifications is available for the event.
1. In Event List, click Stop Remote Notifications for the event.
a The system stops sending the notification messages preconfigured for this
event. The command to start remote notifications is available for the
event.