User Manual

Operating Step
-
by
-
Step
Reports
2
114 | 352 A6V10415471_en_a_40
5. Save the report definition.
NOTE: You can enhance the report configuration at any time, in the future, by
changing the Name and Time filters.
2.5.4.7 Configuring a Report Using In Operator
Scenario: You want to configure a report that displays the data for some objects
and you want to view the data for only those objects that are linked to a graphic.
w Ensure that you have configured an Objects report that displays the data of
some objects.
1. From the Select Columns dialog box select the Related Items Type column.
a The Objects report displays with the Related Items Type column added to
it.
2. Perform the following steps to add a Condition filter with the In operator:
a. From the Condition Filter dialog box, select Related Items Type in the
Available Columns list.
b. Select In (←) from the Operators list.
c. In the Values text field, type Graphics.
d. Click Add.
a The Condition filter is added to the table and displays in the Filter
Expression field below the Add button.