User Manual

Operating Step
-
by
-
Step
Reports
2
A6V10415471_en_a_40 107 | 352
6. Run the report to view the data.
a The report displays the data for analog input object where value is greater
than 100 in the last 24-hours.
7.
(Optional) Click Save.
2.5.4.3 Viewing Event Details using Assisted Treatment
Scenario: You want to create an event details report that displays the details of a
particular event using Assisted Treatment.
w A template for operating procedures is available and the Operational Status
property for the template is set to Enabled.
w An Alarm step is added to the operating procedure template and an Event
Details report is associated with the step. The step is configured as per the
required settings.
w You have configured the report output destination. For information, see
Configure Report Output.
1. Double-click the event in the Event bar.
a The Event Details report displays in Assisted Treatment. Information
related to the event time, category, cause, ID, object description and
designation displays in the report.