User Manual

Operating Step
-
by
-
Step
Reports
2
106 | 352 A6V10415471_en_a_40
5. Specify the time period by adding the Time filter to the report definition.
Perform the following steps to add the Time filter.
a. Right-click the Activities table, point to Filters and select Time Filter. The
Time Filter dialog box displays.
b. Select the Relative option.
c. Select the Last or Current Period option, depending on the data requirement
for the last 24-hour period or current 24-hour period. For more information
regarding setting the time period, see Time Filter. In this example, since data is
required for the last 24-hours, you must select Last and specify 24-hours.
d. Click OK.