Data Sheet for Product

5
Siemens Industry, Inc.
A6V11554094_enUS
Building Technologies
2018-10-26
Mounting
Mounting types
Touch Panels are designed for
● Mounting in the panel door
● Installation in cavity walls using separately ordered installation frames
Mounting Instructions
Mounting installations are printed on the unit's packaging material.
Cut outs for panel installation and wall mounting
See "Dimensions".
Installation
Power is connected to a plug-in screw terminal block.
This connection is not required for Power over Ethernet (PoE).
Commissioning
Touch panels can be commissioned without tools.
All necessary network parameters can be entered directly on the unit.
No additional engineering required for operation using default views.
Each device has a unique identification number to ensure efficient commissioning.
It is also printed on the removable barcode label.
Maintenance
Cleaning
Touch panels are maintenance free.
Dirt on the display can be cleaned using off-the-shelf display cleaners for smart phones, a moist
rag, and/or off-the-shelf microfiber cloth for monitors or glasses.
Firmware upgrade
Firmware upgrades are loaded with ABT Site (at startup, user initiated).
Use either the Ethernet or USB interface.
Repair
The devices cannot be repaired. The entire unit must be replaced.
Disposal
The device is considered an electronic device for disposal in accordance with
the European Guidelines and may not be disposed of as domestic garbage.
● Dispose of the device through channels provided for this purpose.
● Comply with all local and currently applicable laws and regulations.