Data Sheet for Product

5
Siemens Industry, Inc.
A6V11554090_enUS
Building Technologies
2018-10-26
Commissioning
Touch panels can be commissioned without tools.
All necessary network parameters can be entered directly on the unit.
No additional engineering required for operation using default views.
Each device has a unique identification number to ensure efficient commissioning.
It is also printed on the removable barcode label.
Maintenance
Cleaning
Touch panels are maintenance free.
Dirt on the display can be cleaned using off-the-shelf display cleaners for smart phones, a moist
rag, and/or off-the-shelf microfiber cloth for monitors or glasses.
Firmware upgrade
Firmware upgrades are loaded with ABT Site (at startup, user initiated).
Use either the Ethernet or USB interface.
Repair
The devices cannot be repaired. The entire unit must be replaced.
Disposal
The device is considered an electronic device for disposal in accordance with
the European Guidelines and may not be disposed of as domestic garbage.
● Dispose of the device through channels provided for this purpose.
● Comply with all local and currently applicable laws and regulations.
Technical data
Power
Operating voltage
Safety extra-low voltage SELV or
protection by extra-low voltage PELV as per HD384
AC 24 V ±20% (SELV / PELV)
AC 24 V class 2 (US)
DC 24 V ±15% (SELV / PELV)
DC 24 V class 2 (US)
Frequency
50/60 Hz
Maximum power consumption
At AC 24 V
At DC 24 V
Max. 29 VA
Max. 17 W
Processor
Texas Instruments AM5727, 1.5 GHz, Dual Core
Memory
8 GB eMMC, 2 GB SDRAM (DDR3L)
Screw terminals for wire cross sections up to
2.5 mm
2
External supply line fusing (EU)
At AC / DC 24 V power
Non-renewable fuse max. 10 A slow
or
circuit breaker max. 13 A
Tripping characteristic B, C, D per EN 60898
or
Power supply with current limitation of max. 10 A