OPC Interface Specifications Version 4.0 SPC Document No.
Siemens Building Technologies SPC intrusion detection panel This workbook describes the objects provided by the Siemens OPC Data Access Server to represent the SPC control unit Legend ID Object Model Description
Siemens Building Technologies OPC Object Specifications ID Object Model Description SPC-0010 SPC Area Intrusion Area - The area controls alarm mode (Set, Unset, PartSet) and associated zones (Inhibit, Deinhibit, Isolate, Deisolate, Test).
Siemens Building Technologies OPC Object Specifications ID Object Model Description SPC-0020 SPC Door Monitored Door - Access control door.
Siemens Building Technologies OPC Object Specifications ID Object Model Description SPC-0030 SPC Enet Node Node of ENETNODE - Expanders. Commands on OPC Item Mode States OPC Item PresentValue OPC Item Mode Result State 0-Normal 1-Normal Normal 267-Non Default Mode 260-Inhibit Inhibited 267-Non Default Mode 0-Isolate Isolated 3-Fault 1-Normal Fault 2-Alarm 1-Normal Alarm 8-Tamper 1-Normal Tamper 14-Duress 1-Normal Duress \ \ OPC DA Specifications_V4.0_SPC.xlsx \ \ Page
Siemens Building Technologies OPC Object Specifications ID Object Model Description SPC-0040 SPC Mapping Gate Alarming outputs - Intrusion alarming and control outputs mapped on physical output lines. Commands on OPC Item Mode States OPC Item PresentValue OPC Item Mode Result State 15-Activate 0-Normal 1-Normal Deactivated X 7-Active 1-Normal Activated 16-Deactivate X OPC DA Specifications_V4.0_SPC.
Siemens Building Technologies OPC Object Specifications ID Object Model Description SPC-0050 SPC Modem Modem. Commands on OPC Item Mode States OPC Item PresentValue OPC Item Mode Result State 0-Normal 1-Normal Normal 3-Fault 1-Normal Fault 267-Non Default Mode 0-Isolate Isolated 267-Non Default Mode 260-Inhibit Inhibited \ \ OPC DA Specifications_V4.0_SPC.xlsx \ \ Page 7 of 15
Siemens Building Technologies OPC Object Specifications ID Object Model Description SPC-0060 SPC PSU Power Supply Unit. Commands on OPC Item Mode States OPC Item PresentValue OPC Item Mode Result State 0-Normal 1-Normal Normal 3-Fault 1-Normal Fault 267-Non Default Mode 260-Inhibit Inhibited 267-Non Default Mode 0-Isolate Isolated \ \ OPC DA Specifications_V4.0_SPC.xlsx \ \ Page 8 of 15
Siemens Building Technologies OPC Object Specifications ID Object Model Description SPC-0070 SPC System Intrusion System - General conditions related to the SPC intrusion system. Commands on OPC Item Mode States OPC Item PresentValue OPC Item Mode Result State 0-Normal 1-Normal Normal 3-Fault 1-Normal Fault 267-Non Default Mode 260-Inhibit Inhibited 267-Non Default Mode 0-Isolate Isolated 8-Tamper 1-Normal Tamper \ \ OPC DA Specifications_V4.0_SPC.xlsx \ \ Page 9 of 15
Siemens Building Technologies OPC Object Specifications ID Object Model Description SPC-0080 SPC Unidentified Unidentified event - Event with no corresponding object in the database. Commands on OPC Item Mode States OPC Item PresentValue OPC Item Mode Result State 7-Active 1-Normal Activated 2-Alarm 1-Normal Alarm 1-Danger 1-Normal Danger 3-Fault 1-Normal Fault 267-Non Default Mode 0-Isolate Isolated 16-Abnormal 1-Normal Anomaly \ \ OPC DA Specifications_V4.0_SPC.xlsx \ \
Siemens Building Technologies OPC Object Specifications ID Object Model Description SPC-0090 SPC User User - User authorized to operate the intrusion system. Commands on OPC Item Mode States OPC Item PresentValue OPC Item Mode Result State 0-Normal 1-Normal LoggedOut 7-Active 1-Normal LoggedIn (Norm/Duress) \ \ OPC DA Specifications_V4.0_SPC.xlsx \ \ Page 11 of 15
Siemens Building Technologies OPC Object Specifications ID Object Model Description SPC-0100 SPC Xbus X-BUS - Open/Closed loop X-BUS provides connection to the unit expanders. Commands on OPC Item Mode States OPC Item PresentValue OPC Item Mode Result State 0-Normal 1-Normal Normal 16-Abnormal 1-Normal Anomaly/Information \ \ OPC DA Specifications_V4.0_SPC.xlsx \ \ Page 12 of 15
Siemens Building Technologies OPC Object Specifications ID Object Model Description SPC-0110 SPC Zone Intrusion Zone - Intrusion detector(s) protecting a part of the building.
Siemens Building Technologies OPC Object Specifications ID SPC-0120 Object Model Description SPC Event commands This is not an Object Model but provides the read-only information about the event states. The event related to the point can require the acknowledge, silence/unsilence, and reset commands.
Siemens Building Technologies Siemens Switzerland Ltd Building Technologies Division International Headquarters Gubelstrasse 22 CH-6301 Zug Tel. +41 41-724 24 24 www.siemens.com/buildingtechnologies © Siemens Switzerland Ltd 2019 Technical specifications and availability subject to change without notice.
