Data Sheet for Product

7
Siemens Industry, Inc.
A6V11554090_enUS
Building Technologies
2018-10-26
Connections
Screw terminals, plug-in
Cu-wire or Cu-strand with wire end sleeve
1 x 0.6 mm∅ to 2.5mm
2
(22 to 14 AWG)
or 2 x 0.6 mm∅ to 1.0 mm2 (22 to 18 AWG)
Cu-strand without wire end sleeve
1 x 0.6 mm∅ to 2.5 mm
2
(22 to 14 AWG)
or 2 x 0.6 mm∅ to 1.5 mm
2
(22 to 16 AWG)
Stripping length
6...7.5 mm (0.24...0.29 in)
Screwdriver
Slot screws
Screwdriver, size 1 with shaft ø ≤ 4.5 mm
Max. tightening torque
0.6 Nm (0.44 lb ft)
Ethernet interfaces
Plug
2 x RJ45, screened
Interface type
10Base-T / 100Base-TX, IEEE 802.3 compatible
Bit rate
10/100 Mbps, autosensing
Protocol
BACnet on UDP/IP and HTTP or HTTPs on TCP/IP
Galvanic isolation of system neutral
Yes
USB interface
Plug
Type B (USB device)
Data rate (USB 2.0 full speed)
12 Mbps
Protective switch against surges and over current
Yes
Galvanic isolation of system neutral
No
Conformity
Ambient conditions and protection classification
Classification as per EN 60730
Operation of automatic controller
Degree of pollution
Type 1
2
Design type
Protection class III
Degree of protection of housing to EN 60529
Front parts in DIN excerpt
Terminal part
IP30
IP20
Climatic ambient conditions
● Transport (packaged for transport) as per IEC
EN 60721-3-2
● Operation as per IEC/EN 60721-3-3
● Class 2K3
Temperature -25...70 °C (-13...158 °F)
Air humidity 5...95% (non-condensing)
● Class 3K3
Temperature 0...50 °C (32...122 °F)
Air humidity 5...95% (non-condensing)
Mechanical ambient conditions
● Transport per IEC/EN 60721-3-2
● Operation as per IEC/EN 60721-3-3
● Class 2M2
● Class 3M2