Data Sheet for Product

6
Siemens Industry, Inc.
A6V11554090_enUS
Building Technologies
2018-10-26
Maintenance
The devices are maintenance-free.
Firmware upgrade
Firmware upgrades are loaded with ABT Site (at startup, user initiated).
Use either the Ethernet or USB interface.
Repair
The devices cannot be repaired. The entire unit must be replaced.
Disposal
The device is considered an electronic device for disposal in accordance with
the European Guidelines and may not be disposed of as domestic garbage.
● Dispose of the device through channels provided for this purpose.
● Comply with all local and currently applicable laws and regulations.
Technical data
Power supply module
Operating voltage (24 V≃, , )
Safety extra-low voltage SELV or
protection by extra-low voltage PELV as per HD384
AC 24 V ± 20 %, 48...63 Hz
DC 24 V ± 20 %
Functional earth
The functional earth terminal must be connected to the
building's grounding system (PE).
Power consumption
At AC 24 V
At DC 24 V
Max. 9 VA
Max. 4 W
Screw terminals for wire cross sections up to
Max. 2.5 mm
2
Internal fusing
With PTC
External supply line fusing (EU)
Non-renewable fuse max. 10 A slow
or
circuit breaker max. 13 A
Tripping characteristic B, C, D per EN 60898
or
Power supply with current limitation of max. 10 A
Operating data
Hardware information
Processor
Texas Instruments AM3352, 600 MHz
Memory
8 GByte eMMC, 1 GByte SDRAM (DDR3)
Response to power/communication failure
Energy reserve (Supercap) to support real-time clock (3 days).
Data available only if stored to flash memory. Occurs every 30 minutes.