Manualshelf

Data Sheet for Product

ManualsBrandsSiemens ManualsBuilding automationDesigo CC MP 5.0 BACnet Server, BACnet Protocol Implementation Conformance Statement (PICS), Basic Documentation
12345678910
4
Siemens Industry, Inc.
A6V11554090_enUS
Building Technologies
2018-10-26
Service button
Button
Press
Description
S
Short
Physical identification on the network (Ethernet)
As per description
Do the following to delete the device:
1. Switch off the device.
2. Switch on the device.
3. Wait until all LEDs turn on and then off and then
press the S button.
4. Keep the S button pressed until the green RUN LED
starts to flash and then release.
5. Wait until the device has fully started – unconfigured
(RUN LED on, SVC LED flashes).
The device configuration must be reloaded using ABT Site
to perform additional configurations.
Design
9294z01_02
2
3
4
5
6
7
1. Plastic housing
2. Plug-in terminal block (operating voltage)
3. 2-port Ethernet switch (with 2 LEDs per port for display purposes)
4. LED displays for device and system status
5. Tool interface (USB device)
6. Service button for identification on network
7. Slider for mounting on DIN rail