User Manual

OPC Object Specifications
Siemens
Building Technologies
ID Object Model
Description
XLS-0150
XLS HCP Output Device
OPC Item PresentValue
OPC Item Mode Result State 4 - Enable 5 - Disable 6 - Activate 7 - Deactivate
0-Quiet 1-Normal Normal
X X X X
2-Alarm 1-Normal Alarm
X X X X
3-Fault 1-Normal Fault
X X X X
267-Non Default Mode 12-Disabled Disabled
X X X
Result State 4 - Enable 5 - Disable 6 - Activate 7 - Deactivate
Normal
X X X X
Alarm
X X X X
Fault
X X X X
Disabled
X X X X
Enabled
X X X X
514-Alarm
515-Fault
267-Non Default Mode
268-Trouble Bypass
Intelligent control point, capable of switching on and supporting a notification appliance
circuit, telephone, or speaker zone that is remotely located near a detector loop.
States
Commands on OPC Item Mode
States
Commands on OPC Item Relay1.Present Value
OPC Item Relay1.PresentValue
512-Quiet
OPC DA Specifications_V4.0_XLS.xlsx Page 23 of 53