User Manual

5BConfiguring a Project Backup/Template
6
13 | 16
Siemens
Configuration Manual for Windows
Embedded Hardware
A6V11312157_en_a_40
Building Technologies
2018-01-30
6 Configuring a Project Backup/Template
You need to configure the project backup settings in order not to exceed the
recommended disk space. We recommend using the standard HQ template
BA_EN_Template_Compact provided with distribution media. Otherwise, you need
to configure the project backup with the following settings.
 You are compliant with the hardware and software requirements for an
embedded system.
 To backup the project, the project must be started.
1. In System Browser, select Management View.
2. Select Project > Management System > Servers > Main Server.
3. In the Extended Operation tab, set the following properties:
– Emergency Mode Memory Limit: Set to 204,800KB (~200mb) or in range of
200mb.
The Desigo CC client will not open if no sufficient free memory is available.
Click
Apply.
– Maximum number of stored backups: Set to 1 if project size is bigger and
disk space is less. (You also perform this on embedded PC after restoring
the project). Click
Apply.
4. If you want to perform the project backup, click Start.
 When the backup is successfully completed, the project backup becomes
available on the server at the
Backup Destination path.