Desigo™ CC Configuration Manual for Windows Embedded Hardware Configuration A6V11312157_en_a_40 2018-01-30 Building Technologies
Table of Contents About this Document .............................................................................................3 Document Revision History ....................................................................................... 7 2 | 16 Siemens Building Technologies 1 Overview .....................................................................................................8 2 Hardware Specification ................................................................................
7BAbout this Document 8BDocument Revision History About this Document Purpose This manual describes the Desigo CC BA Compact Edition and gives the reader an overview of the system characteristics, the hardware, software requirements, the system limits and so on. It provides an overview to the supported system connectivity and the recommended system configurations. Scope This document applies to Desigo CC Version 3.0 Extension Pack 1.
7BAbout this Document 8BDocument Revision History Liability Disclaimer We have checked the contents of this manual for agreement with the hardware and software described. Since deviations cannot be precluded entirely, we cannot guarantee full agreement. However, the data in this manual are reviewed regularly and any necessary corrections included in subsequent editions. Suggestions for improvement are welcome.
7BAbout this Document 8BDocument Revision History Getting Help For more information about the Desigo CC products, contact your local sales representative.
7BAbout this Document 8BDocument Revision History Safety Messages According to ANSI Z535.6 ANSI standard safety messages are used throughout Help to make you aware of important information. ANSI distinguishes between property damage messages and personal injury messages. ● The property damage message has this label: NOTICE.
BAbout this Document 8BDocument Revision History Document Revision History Document Identification The document ID is structured as follows: ID_Language(COUNTRY)_ModificationIndex_ProductVersionIndex Example: A6Vnnnnnnnn_en_a_02 Document Revision History Modification Index Edition Date Brief Description a 2018-01-30 V3.
1 0BOverview 1 Overview Desigo CC has been proved to work on a Windows embedded as well as on the desktop computer. The document describes the requirements for the Windows embedded hardware. In order to perform this test Desigo CC Building Automation (BA) Compact product has been used.
1BHardware Specification 2 2 Hardware Specification In the table below, two examples of embedded configuration where Desigo CC has been tested are listed. The Desigo CC BA Compact can be configured on any equivalent hardware configuration. Category SIMATIC (customized model: IPC227E) Advantech (customized model: ARK-1123H-3S51) CPU 1.83 GHz 2.0 GHz Intel Celeron N2930 Intel Celeron 4C J1900 http://w3.siemens.com/mcms/pcbased-automation/en/industrialpc/box-pc/simaticipc227e/Pages/Default.
3 2BDisk Space Requirement 3 Disk Space Requirement Category Minimum Required Disk Spare (GB) Space (GB) Total (GB) Win10 IoT Enterprise 2016 LTSB 17 5 22 HDB with Default Size (3 GB) Can be increased based on disk space availability 3 6 (Transaction Log) 32 1 (Backup and recovery log) 7 (Total) Virtual Memory 8 40 Desigo CC Setup 10 50 Desigo CC Installation + 4 EMs Program Data, Files and User 4 Total required Disk Space 54 4 62 62 NOTE: Disk space for EMs may slightly vary in case o
3BSoftware Requirements 4 4 Software Requirements Operating System ● Win10 IOT Enterprise 2016 LTSB SQL ● Microsoft SQL Server 2014 - Express Edition Extension Modules The following information is exemplified for BA use case. In case of others such as Danger Management System (DMS) the features, limitations, and license requirements may be different. Contact your local sales support for more information.
5 4BInstalling and Configuring IIS on Windows 10 IoT 5 Installing and Configuring IIS on Windows 10 IoT For embedded hardware configuration only Web Client connectivity is supported. Hence you must install and configure IIS according to the following instructions. IIS configuration must be done before performing Desigo CC installation. 1. Right-click on the Windows Start menu. 2. Select Control Panel > Programs and Features > Turn Windows features on or off. The Windows Features dialog box displays. 3.
5BConfiguring a Project Backup/Template 6 6 Configuring a Project Backup/Template You need to configure the project backup settings in order not to exceed the recommended disk space. We recommend using the standard HQ template BA_EN_Template_Compact provided with distribution media. Otherwise, you need to configure the project backup with the following settings. You are compliant with the hardware and software requirements for an embedded system. To backup the project, the project must be started. 1.
7 6BSetting up Compact system on Windows 10 IoT 7 Setting up Compact system on Windows 10 IoT Windows 10 IoT installation is completed successfully. You have installed and configured IIS on Windows 10 IoT [➙ 12]. 1. Install Desigo CC Server setup with required set of EMs, language packs (enUS is default) needed. – – – – – – – – – – – – BACnet Standard BAS_Common BA_Modbus Modbus Web Services BAS_EN Desigo PX Desigo System Desigo TRA iBASE Node Map Scripting 2. Launch SMC. 3.
6BSetting up Compact system on Windows 10 IoT 7 NOTE: If you use the Silent installation for installing Desigo CC, then you must use the self-signed certificate for web site and web application creation. Currently Silent installation only supports self sign certificate for website and hence mobile app will not work as it requires root-host certificate combination configured with website of WSI web application. 9.
Issued by Siemens Switzerland Ltd Building Technologies Division International Headquarters Gubelstrasse 22 CH-6300 Zug +41 58 724 2424 www.siemens.com/buildingtechnologies Document ID: A6V11312157_en_a_40 Edition: 2018-01-30 © Siemens Switzerland Ltd, 2018 Technical specifications and availability subject to change without notice.
