User Guide
Table Of Contents
About This Document
Applicable Documents
A6V11979523_en_b
3 | 26
About This Document
Purpose
These guidelines are designed to provide guidance and conditions for connecting
to legacy fire and intrusion detection systems over NK823x devices to the Desigo
CC system. They describe all the permitted applications for the intended
operational environment.
For security-related information for the system owner for maintaining security in the
life cycle of the system, see Operation/Maintenance [➙ 16].
Scope
This document applies to NK823x and Desigo CC.
Retention and Availability
NOTICE
Damage Due to Misuse
This document must be available in a usable format throughout the entire life
cycle of the product. Keep the document for reference and ensure that it can be
accessed by target groups.
Should you require another copy of this document, contact Customer Support
Center at +49 89 9221-8000 or email fs.support.sbt@siemens.com.
Target Audience
System owner, according to EN 50110-1, is ‘nominated person with the overall
responsibility to ensure the safe operation of the electrical installation by setting
rules and organization or framework’. 'This person can be the owner, employer,
proprietor, or a delegated person.' 'Some of these duties can be delegated to
others as required. For large or complex electrical installations or networks, the
duties can be delegated for parts of the installations or the network.'
IT security officers support companies when it comes to assessing the security of
products, solutions, and services, and defining and implementing improvements.
They are technical experts in all aspects of IT security.
Project Manager coordinates the deployment of all persons and resources
involved in the project according to schedule, provides the information required to
run the project, has obtained suitable specialist training for the function and for the
products, and has attended the training courses for Project Managers.
Commissioning Personnel configure the product at the place of installation
according to customer-specific requirements, check the product operability and
releases the product for use by the operator, search for and correct malfunctions,
have obtained suitable specialist training for the function and for the products, and
have attended the training courses for commissioning personnel.
Source Language and Reference Document
● The reference version of this document is the international version in English.
The international version is not localized.