Installation Instructions

15
A6V11349526_enUS_b Siemens Industry, Inc.
Building Technologies Division
7.2.1 Adding Extension Modules (EMs)
1. Select Add to Project Project Extension. The Dialog box is displayed.
2. Click Select All.
3. Click OK.
4. In the toolbar, click Save Project.
The project will be updated with the additional extension modules. This will take a few
minutes.
7.2.2 Starting a Project
At least one project is available under the Projects root folder and is stopped.
1. In the Console tree, select the Projects node.
2. In the Projects tree, select the project that you want to start.
3. Click the Project Settings tab, if not yet selected.
Project Settings displays.
4. In the Project Settings toolbar, click Start Project . The Start Project icon is enabled only
when the selected project is stopped.
- The project starts running.
- On successful completion.
- The selected project is started, the toolbar Start icon is dimmed, and only the Stop icon is
available.
- The status Started along with the green project started status indicator displays in the Project
and System Information expander of the Project Settings tab.
5. Close the System Management Console (SMC) using the X on the top right corner once the
project is successfully started.
8 Start Desigo CC Client (User Interface)
1. Open Client interface by selecting the Desigo CC icon on the desktop. Alternatively,
Select the Start Menu > Siemens, and then click Desigo CC.