User Guide

15
System-related Functions
Auto Logoff
370
Siemens User Guide Version 2.1 A6V10415471_en_a_21
Building Technologies 2015-07-15
3. Click Logon.
 The current user is logged off from the system. The system splash screen
informs you of the system initialization progress. When the system is initialized,
it restarts with your user credentials.
Technical Notes
 If you provide invalid credentials, a message displays informing you to verify
the credentials.
 If you provide the same credentials for the current and the new user, the Logon
button stays inactive and you cannot logon.
WARNING
The current version of Desigo CC supports only one domain. This means that you
can only log on to the configured default domain. If you belong to a domain
different from the default, you can log on only as a Desigo CC user or local user
(
[station name]\ user name] ).
The default domain name is configuration-dependent. If default domain name is
not configured, the
default station name and Desigo CC (not Windows user) are
available as domain instead.
15.3 Auto Logoff
The auto logoff is a system-configuration feature. If configured, and you are not
using the keyboard and the mouse because you are not at the computer where
Desigo CC client application is running, a message informs you that you will be
logged off automatically.
You have 30 minutes to decide whether to be logged off or continue your work
session.
When this message box displays, Windows screensaver is disabled.
15.3.1 Interrupting the Auto Log Off
 You are not using the computer where Desigo CC client application is running.
 The log off message box displays the time remaining before the automatic log
off.
 You want to stop the log off.
 Move the cursor or press any key on the keyboard.
 The auto log off is interrupted.
15.4 Logging On and Off in Closed Mode
Desigo CC can be installed on a client computer configured to run in Closed mode.
Consequently:
 If the computer is powered on, Default User is logged on and the operator can
log off [➙ 371] the
Default User and log on with user credentials. To hand over
to another operator it is necessary to log off [➙ 371] the first operator (
Default
User
is automatically logged on); then the other operator can log off [➙ 371]
the
Default User and log on with user credentials.
 If the computer is powered off (for example, manually by the operator, hard
reset, or because of power failure), once the operator powers on again the
computer, Desigo CC starts in Closed mode with
Default User automatically
logged on.