User Guide

11
Macros
Working with Macros
352
Siemens User Guide Version 2.1 A6V10415471_en_a_21
Building Technologies 2015-07-15
11.2.3 Executing a Macro
 You are authorized to issue standard commands on the relevant project scope.
 The macro you intend to run is currently enabled.
1. In System Browser, select Application View.
2. Select Applications > Logics > Macros.
3. Expand the Macros node. Locate and select the macro you want to execute.
 The macro control commands [➙ 349] display in the Contextual pane.
4. In the Operation tab, click Execute.
 The macro starts executing.
11.2.4 Aborting a Macro
 You are authorized to issue standard commands on the relevant project scope.
 A macro is running and performing a time-delay instruction (waiting phase).
1. In System Browser, select Application View.
2. Select Applications > Logics > Macros.
3. Expand the Macros node. Locate and select the macro you want to abort.
 The macro control commands [➙ 349] display in the Contextual pane.
4. In the Operation tab, click Abort.
 The macro stops executing.
NOTE:
Macros can be aborted before their normal termination only during the waiting
phases corresponding to time-delay instructions.