User Guide
Macros
11
Macros Workspace
349
Siemens User Guide Version 2.1
A6V10415471_en_a_21
Building Technologies 2015-07-15
11.1.1 Macro Properties and Control Commands
The Operation tab in the Contextual pane provides status information and
commands about the macro selected in System Browser.
Macro control commands are available as buttons on the right-hand side of the
Operation tab.
Macro Control Commands in the Contextual Pane
Macro Properties
Property
Description
Operational Status Indicates whether the macro is enabled (meaning it is available to be
run by the user) or not:
Enabled: the macro is currently active, and the Disable button is
available.
Disabled: the macro is currently inactive, and the Enable button
is available.
Activity Status Indicates whether the macro is currently running, aborting, or not
running:
Executing (the macro is running)
Idle (the macro is not running)
Aborting (the macro is in the process of stopping)
Last Execution
Status
Indicates the outcome the last time the macro was run:
Never Executed (the macro has not previously been run)
Succeeded (the previous execution of the macro ended
successfully)
Aborted by user
Failed
Partially failed
Last Execution User Name of the user who last executed the macro.
Last Execution Time Date and time when the macro was last executed.
Macro Control Commands
Command
Description
Disable Makes the macro no longer available for execution.
Enable Makes the macro available for execution.
Abort Stops the macro (if it is running and executing a time-delayed
instruction within the macro).
Execute Runs the macro.