User Guide

3
System Manager
Operation/Extended Operation
34
Siemens User Guide Version 2.1 A6V10415471_en_a_21
Building Technologies 2015-07-15
command. During the command, the Command Feedback area displays
Command in Progress, along with information about how many objects
have been commanded and how many will be commanded all together.
After a command execution is complete, successful commands display
Property Name successful
.
Failed commands display Command
failed
.
7
Send Button
The
Send
button displays only for commands that require additional
arguments. Clicking this button sends a command after you have entered all
required arguments.
3.4.3 Working with Operation/Extended Operation
3.4.3.1 Commanding Properties
 You have selected the object whose properties you want to command.
1. Click the Operation or Extended Operation tab.
 The tab displays properties of the object, their states, and all commands
available to you for the properties.
2. Click the command button that displays the command you want to execute.
 If the command does not have arguments associated with it, the command
is sent and the status displays.
 If the command button has arguments associated with it, go to the next
step.
3. Complete the required fields.
4. Click Send.
 The system displays the status of the command.
3.4.3.2 Commanding Properties for Multiple Objects
 You have selected multiple objects of the same type whose properties you
want to command.
1. Click the Operation or Extended Operation tab.
 The tab displays properties of the objects, their states, and all commands
available to you for the properties. Properties affected by multiple selection
of objects display an icon with a triangular symbol in the lower right-hand
corner.
2. Click the triangular symbol on the icon next to the property you want to
command.
 The table row of the property expands to show multiple instances of the
property—one for each of the objects selected.
3. Click the command button that displays the command you want to execute.
 If the command does not have arguments associated with it, the command
is sent and the status displays.
 If the command button has arguments associated with it, go to the next
step.
4. Complete the required fields.
5. Click Send.