User Guide

Reports

Examples

312

Siemens User Guide Version 2.1 A6V10415471_en_a_21

Building Technologies 2015-07-15

6. Specify the time period by adding the Time Filter to the report definition.

Perform the following steps to add the Time filter.

a. Right-click the Event Details table, point to Filters and select Time Filter. The

Time Filter dialog box displays.

b. Select Relative.

c. Select either the Last or Current Period option, depending on the data

requirement for the last 24 hour period or current 24 hour period. For more

information regarding setting the time period, see Time Filter [➙ 243]. In this

case, as we want the data for the current 24-hour period, select Current Period

and specify 24 hours.

d. Click OK

7. Run the report [➙ 280] to view the data.

 The report displays the details of any Fault or Life Safety events that

occurred on the Analog Output 1 object in the current 24-hour period.

8. Save the report definition [➙ 278] if the data matches your requirements.

NOTE: You can enhance the report configuration at any time in the future by

adding/removing columns or by setting additional objects as name filter,

removing existing objects from the name filter, or by modifying the condition

filter, time filter criteria.