User Guide

9
Reports
Examples
310
Siemens User Guide Version 2.1 A6V10415471_en_a_21
Building Technologies 2015-07-15
9.22.3.2 Viewing Event Details using Assisted Treatment
 You have created an Operating Procedure template in Operating Procedures in
System Browser and have completed the required configuration steps. See the
Operating Procedures help in the Engineering Manual A6V10415473 for
creating and configuring an Operating Procedure template.
 Ensure that the Operational Status property for the Operating Procedure
template is set to Enabled. See the Operating Procedures help in the
Engineering Manual A6V10415473 for additional information.
 An Alarm step is added to the Operating Procedure template and an Event
Details report is associated with the step. The step is configured as per the
required settings. See the Operating Procedures help in the Engineering
Manual A6V10415473 for creating and configuring the alarm step.
1. Double-click the event in the Event bar.
 The Event Details report displays in Assisted Treatment. Information
related to the event time, category, cause, ID, object description and
designation displays in the report.
2. Click before the event entry.
 Additional information related to the event such as Time, Action, User
Name, Management Station, Attachment, Value, and Previous Value
display as child records.
3. Perform the required steps to treat the event from the Contextual pane.
4. Click Send to Output on the toolbar.
 The report is routed to a file, email, or printer according to the Report Output
configuration settings [➙ 292]
.
NOTE: If you have not specified the report output configuration settings, the