User Guide

Reports

Examples

307

Siemens User Guide Version 2.1

A6V10415471_en_a_21

Building Technologies 2015-07-15

d. Click OK.

7. Run the report [➙ 280] to view the data.

 The report displays the data for analog input object where value is greater

than 100 in the last 24-hours.

8. Save the report definition [➙ 278] if the data matches your requirements.

NOTE: You can enhance the report configuration at any time in the future by

adding/removing columns or by setting additional objects as name filter,

removing existing objects from the name filter, or by modifying the condition

filter, time filter criteria.

9.22.3 Event Details Report

This section provides information on configuring the Event Details report and its

constraints.

Overview

The Event Details report provides information related to events and their treatment.

When you run the report, the preliminary details of the event such as Event Time,

Event Category, Event Cause, Event ID, Object Description, and Object

Designation display as parent records. Additional information related to the

treatment of the event such as Time, Action taken, Message text, User Name,

Management Station, Attachment, Value, and Previous Value display as child

records. The child records display only in the Run mode. The total number of

available children can be read from the

Row No

column.

The number of records that display in the child table depend on the following:

 If a name filter with wild card characters is applied to the report or a default

name filter is applied, then the latest 1000 records display.