User Guide

9
Reports
Configuring a Report Definition
268
Siemens User Guide Version 2.1 A6V10415471_en_a_21
Building Technologies 2015-07-15
9.7.4.1 Deleting a Keyword
 You have inserted at least one label in the selected Report Definition.
1. Select the label that contains the keyword you want to delete.
NOTE: To delete a keyword you must delete the label.
 The border color changes to indicate that the label is selected.
2. Either right-click the label and select Delete, or press the DEL key.
 A confirmation message displays.
3. Click Yes to confirm.
 The selected label and keyword are deleted.
9.7.5 Inserting a Logo
 You have added [➙ 268] at least one logo to the Logo group box.
1. From the Reports ribbon, click the Home tab.
2. Do one of the following:
– From the Insert group box, click the Logo group box and select a logo, and
then drag-and-drop it on the Report Definition where you want to insert the
selected logo.
– In the Report Definition, place the cursor where you want to insert the logo,
right-click and select the required logo from the
Insert Logo option.
 The logo is inserted in the Report Definition.
Tips
 To insert a logo in the header/footer section of a Report Definition, delete any
existing label.
 You can change the position of the logo in the Report Definition by using the
Move buttons (up
, down , top , bottom ) present in the
Placement group box of the Layout tab, or by right-clicking a logo in the Report
Definition, and selecting
Move.
9.7.5.1 Adding a Logo
1. From the Reports ribbon, click the Home tab.
2. From the Insert group box, click the Logo group box and select Manage Logo.
 The Manage Logo dialog box displays.
3. Click Browse.
4. Select an image file, preferably in the format: .bmp, .jpeg, .png, or .gif.
5. Click Open.
 The Select logo to upload field displays the file path. You cannot edit this
field. The image file name is saved as the logo name.
6. Click Upload.
 The image is added to the Available Logos list.
NOTE: The Logo file is saved in the directory: