User Guide

Reports
9
Reports Workspace
239
Siemens User Guide Version 2.1
A6V10415471_en_a_21
Building Technologies 2015-07-15
NOTE:
For a plot, you can set only one Name Filter at a time.
Validate Checks whether the applied filter is valid or not.
NOTE:
Displays only for Trends Table, Trends Plot, and Graphics
Plot.
Accept Accepts the change made to a Name Filter. This button is
unavailable until a change is made to an existing Name Filter.
New Adds a new Name Filter to the Name Filter list. This button is
unavailable until a Name Filter is typed in the Name field or if any
existing Name Filters are selected in a Name Filter list.
NOTE:
When you add the Name Filter for the very first time, the
default Name Filter *:* is replaced.
Delete Deletes an existing Name Filter. This button is unavailable until one
or more Name Filters is selected in the Name Filter list.
NOTE:
When all the Name Filters are deleted the default Name
Filter *:* is restored.
NOTE 1:
When an Activities, Events, Active Events, BACnet Alarm Summary, BACnet
Enrollment Summary, BACnet Event Information, and/or Objects table is inserted
in the Report Definition, a valid Name Filter “*:*” is added by default.
NOTE 2:
For Trends table, Trends plot, and Graphics plot no default Name Filter is added.
You can apply only single Name Filter.
NOTE 3:
For Trends table, you can drag-and-drop Offline, Online Trend Logs, and Trend
View Definitions.
Wildcard Characters in Name Filters:
You can use wildcard characters (* and ?) in a name filter. The following examples
will help you in using these characters:
 To display the details of only Analog Output objects of a device, Dev 1 in a
report, specify the name filter as
"System1.ManagementView:ManagementView.FieldNetworks.BAC1.Hardware
.Dev1.Local_IO.AO*". When you run the report, the details of all the Analog
Output objects belonging to the Dev 1 device will display.
 To display the details of only Analog Output objects of all system devices in a
report, specify the name filter as
"System1.ManagementView:ManagementView.FieldNetworks.BAC1.Hardware
.Dev*.Local_IO.AO*". When you run the report, the details of all Analog Output
objects belonging to all devices in the system with names starting with
Dev will
display.
 To display the details of Analog Output objects with names starting from
Analog Output 11 through Analog Output 19 of device Dev 1 in a report, specify
the name filter as
"System1.ManagementView:ManagementView.FieldNetworks.BAC1.Hardware
.Dev1.Local_IO.AO_1?". When you run the report, the details of Analog Output
objects with names starting from AO_11 through AO_19 belonging to device
Dev 1 will display. The assumption here is that there is a device Dev1 in your
system that has Analog Output objects with names starting from AO_11
through AO_19.
 If you want to display the details of Analog Output objects with names starting
from Analog Output 11 through Analog Output 19 of all devices with names in
the range of 21 through 29 in a report, specify the name filter as