User Guide

9
Reports
Reports Workspace
238
Siemens User Guide Version 2.1 A6V10415471_en_a_21
Building Technologies 2015-07-15
9.2.3.1 Name Filter
The Name Filter allows you to filter data based on the Name or Description of
System Browser objects.
You can apply a Name Filter to a table or plot.
Name Filter Dialog Box
Use the Name Filter dialog box to add [➙ 272], edit [➙ 272] and delete [➙ 273]
Name Filter condition(s).The added Name Filter is also added to the
Name Filter
group box when the dialog box is closed.
Name Filter Dialog Box
Name Filter Dialog Box Components
Field
Description
Name Creates a Name Filter according to the object name displayed in
System Browser.
Description Creates a Name Filter according to the object description displayed
in the System Browser. A message displays below the
Name Filter
list if the filter is invalid (in red color).
Name Filter List Lists all the Name Filters and displays whether the applied filter is
valid or not. The Name Filter list contains four columns.
Total no. of filters
: Displays the total number of filters in the column
header and displays the sequential number before each Name
Filter.
Valid
: Shows if the applied filter is valid or not (OK or question mark
symbol (?) respectively).
Children
: Disabling this check box excludes the child nodes of the
System Browser object from the Report Definition.
Name Filter
: Displays the hierarchical path of the System Browser
object.
Name Filter Displays the filter that is currently selected in the Name Filter list.
You can type a name into this field. For example, Application View.
Site.Building.Floor1.*