User Guide

8
Trends
Printing
216
Siemens User Guide Version 2.1 A6V10415471_en_a_21
Building Technologies 2015-07-15
 When there is more than one data point information state, the states are
separated by comma and space.
 In Excel, the cell is comma separated, regardless of the regional settings by the
current user.
 In Excel, the end of the line is = CR, LF.
NOTE 1:
The data points unit is not exported in this version.
NOTE 2:
Individual lines are not synchronized That is the time stamps in each line normally
differ between the various Trendlog objects.
The following table lists supported data point states:
Trend View Symbol
Syntax
Description
Value_OK Value in
Normal
state.
Value_InAlarm
Value in
Alarm
state.
Value_OutOfService
Value in
Out of Service
state.
Value_Fault
Value in
Fault
state.
Value_Overriden
Value in
Overridden
state.
LogDisabled Trendlog object is disabled.
LogEnabled Trendlog object is enabled.
BufferPurged Buffer in the Trendlog object is deleted.
DataLost No connection to data point.
Overflow Trendlog buffer is full.
8.9 Printing
There are two methods for printing a Trend View:
 Using the Reporting function (see Inserting a Plot)
 Print function in the Trend View