User Guide
8
Trends
Analyzing Trend Data
208
Siemens User Guide Version 2.1 A6V10415471_en_a_21
Building Technologies 2015-07-15
Repeat Functions
Click the time range scrollbar to the left or right of the time range slider. The
time range slider moves in the corresponding direction per the time range
defined in the time range slider.
Click the left or right arrow on the time range scrollbar. The time range slider
moves in the corresponding direction at a 1:10 ratio for the selected time range.
NOTE:
Data is compressed for display purposes only if you select a large time range or
very large number of measured values. All data is displayed for smaller time
ranges.
8.7.3 Selecting Absolute Time Range
You want to define the time window with a precise start and stop date.
Time period
Current date
Start date End date
Data recording
You are in an active Trend View.
1. Right-click the time range bar
.
2. Click Select range.
The Select Date/Time window displays.
3. From the Selection type drop-down list, select the Absolute.
4. Click the displayed Start time.
The Calendar dialog box opens.
5. Enter the desired start date in the calendar dialog field.
– Select Month/Year with the symbols.
– Click the appropriate Date.
6. Click the displayed time at Start time and enter the desired start time.
7. Click the displayed End time.
The Calendar dialog box opens.
8. Click the displayed time at End time and enter the desired end data in the
calendar dialog box.
– Select Month/Year with the symbols.
– Click the appropriate Date.
9. Click the displayed time at End time and enter the desired Stop time.
10. Click OK.