User Guide

7
Scheduler
BACnet Scheduling
166
Siemens User Guide Version 2.1 A6V10415471_en_a_21
Building Technologies 2015-07-15
5. Click Save .
7.4.3.10 Deleting an Exception
1. In System Browser, select Application View > Schedules > BACnetSchedules.
2. Open the schedule with the exception you want to delete.
3. In the schedule area, right-click the exception you want to delete.
NOTE: Exceptions are highlighted with a red bar on the left side of the entry.
4. Click Delete Exception.
5. Click Save .
7.4.3.11 Adding an Exception Entry
1. In System Browser, select Application View > Schedules > BACnetSchedules.
2. Open the schedule you want to add an exception entry to.
3. Right-click the exception to which you want to add an entry
4. Click Add New Exception Entry.
5. Complete the fields in the Schedule entries section.
6. Click Save .
7.4.3.12 Modifying an Exception Entry
1. In System Browser, select Application View > Schedules > BACnetSchedules.
2. Open the schedule you want to modify.
3. In the schedule area, select the exception entry you want to modify.
NOTE: Exception entries are highlighted with a red bar on the left side of the
entry.
4. In the Exceptions tab, modify the fields as needed.
NOTE: If you use wildcards for date ranges, make sure to read your vendor’s
field panel documentation since the implementation of this feature is vendor-
specific.
5. Click Save .
7.4.3.13 Deleting an Exception Entry
1. In System Browser, select Application View > Schedules > BACnetSchedules.
2. Open the schedule with the exception entry you want to delete.
3. Right-click the exception entry you want to delete.
NOTE: Exception entries are highlighted with a red bar on the left side of the
entry.
4. Click Delete Exception.
5. Click Save .