User Guide

6
Remote Notifications
Working with Remote Notifications
138
Siemens User Guide Version 2.1 A6V10415471_en_a_21
Building Technologies 2015-07-15
Selecting Remote Notifications
1. In System Browser, select Application View.
2. Select Applications > Remote Notifications.
 RENO Messages displays in the Primary pane, and lists all the remote
notifications available in the system (that is, all the preconfigured alarm-based
notifications as well as any new remote notifications composed and sent by the
operator).
Selecting a Remote Notification
1. In System Browser, select Application View.
2. Select Applications > Remote Notifications, and then select the desired remote
notification.
 RENO Messages displays in the Primary pane, and lists all the alarm-based
remote notifications for the selected node.
Selecting New Remote Notification
1. In System Browser, select Management View.
2. Select Project > System Settings > Related Items Templates > New Remote
Notification.
 RENO Messages displays in the Primary pane, and lists all the new remote
notification messages composed and sent by you.
Selecting a Point in Alarm
 A point is in alarm and RENO Message tab is available in the Primary pane.
You want to view the associated remote notification.
1. In System Browser, select the point in alarm.
2. Select the RENO Messages tab, if not yet selected.
 RENO Messages displays in the Primary pane, and lists alarm-based remote
notifications for the selected point.
6.3.2 Enabling a Remote Notification
If an alarm-based remote notification is not enabled by configuration, you need to
enable it before any operators or stations can dispatch it. The enabled status
applies to all users of the system, so that enabling a remote notification means that
any authorized users will be able to dispatch it.
To enable a remote notification proceed as follows:
 The remote notification is currently inactive (its status in the Contextual pane is
Disabled), and you want to enable it.
1. In System Browser, select Application View.
2. Select Applications > Remote Notifications.
3. Under Remote Notifications, select the remote notification you want to enable.
4. To enable the remote notification, in the Operation tab of the Contextual pane,
click Enable.
 The status of the current remote notification changes to Enabled.