User Guide

5
Alarm Management
Overview of Alarm Handling
114
Siemens User Guide Version 2.1 A6V10415471_en_a_21
Building Technologies 2015-07-15
 You have selected an event.
 The command to
unsilence the field panel is available in the event descriptor
[➙ 84].
 Click Unsilence .
 The field panel is unsilenced.
5.5.9.7 Starting/Stopping Remote Notifications
 You have selected an event.
 The command to manually
start remote notifications is available in the event
descriptor [➙ 84].
 Click Start Remote Notifications .
 The remote notification is started.
 You have selected an event.
 The command to
stop remote notifications is available in the event descriptor
[➙ 84].
 Click Stop Remote Notifications .
 The remote notification is stopped.
Operation Notes
 You can start/stop remote notifications regardless of whether or not the event
has been reset.
 These operations are the same as when handling [➙ 140] an alarm-based
manual remote notification directly from RENO Messages.
5.5.9.8 Tagging/Untagging Events
You can hide some events in Event List until they change their state or until you
want to see them again. You do this by tagging/untagging events in Event List thus
applying a Filter by Tag [➙ 97].
 The Tag column is available in Event List.
 By default, events in Event List are untagged, and the Tag column appears
empty.
1. Move your cursor over the Tag column that corresponds to event you want to
tag.
 The Tag icon appears in the Tag column.
2. Click Tag .
 The event is now tagged.
 You have tagged some events, and now you want to untag them.