User Guide

5
Alarm Management
Overview of Alarm Handling
110
Siemens User Guide Version 2.1 A6V10415471_en_a_21
Building Technologies 2015-07-15
Steps Workspace
Step Elements
Item
Description
1 Symbol that indicates a mandatory step.
2 Step identifier. This number may or may not correspond to the
execution order.
3 Briefly describes the type step.
4 Depending on the step's configuration, you will see a white or gray
check box:

A tooltip tells you that you cannot check off the step
because you haven't done all the actions required to complete
the step (for example, complete a remote notification procedure
or fill out and save an event treatment report).

A tooltip tells you that you that you can check off the step to
mark it as completed.
Once you check off a step as executed, a checkmark icon
displays in the place of the check box, to indicate that the step has
been completed.
5 Graphically indicates the step's execution status as follows:

in progress
 successfully executed
 failed
6 Graphically indicates that the step is selected and the relevant
application for performing that step is available in the Default tab of
the Primary pane.