Operating Instructions
Table Of Contents
General settings
Local settings
77 | 80
Siemens
A6V11211557_enUS_b
Building Technologies
2019-01-15
Name
Description
①
Desigo Control Point device
Location
Modify the location description for the device.
Time zone
Select the appropriate time zone from the drop down list.
Active system language
Select the desired system language from the drop down list.
Equipment identifier
Modify the equipment identifier for the device
Description
Modify the device description.
②
Network port for IP
Network number
Range is 0 to 65534.
UDP port
Range is 0 to 65535.
IP address
IP subnet mask
IP default gateway
Enable (IP) DHCP
Yes – Use dynamic IP addressing.
No – Use a fixed IP address.
Device instance number
Range is 0 to 4194303.
Device name
Modify the device name.
Command
Activate – Apply the new settings. The device may reboot depending on the settings changed.
Discard changes – Discard your changes and return to the Favorites list.
Restart port– Restart the IP port.