Operating Instructions
Table Of Contents
General settings
Configuring email recipients
72 | 80
Siemens
A6V11211557_enUS_b
Building Technologies
2019-01-15
9.3 Configuring email recipients
Configure email recipients adds, edits and removes email addresses for those who are
receiving emails from the Operation application. Common uses for email include alarm
notification, automatic email of exported trend data or emailing generated reports.
Adding email recipients to the Operation application
1. Select > > Configure email recipients > .
2. In the Add email recipients dialog box, type one or more email addresses
separated by a comma.
3. Click Apply to save the email addresses.
4. If desired, select the Send test email check box to send a test email to the list of
recipients.
5. Click OK to complete the procedure.
Editing email recipients in the Operation application
1. Select > > Configure email recipients > .
All email addresses in the Operation application are displayed.
2. Select the email address(es) to edit and click Edit.
3. Modify the email addresses as needed.
4. Click Apply to save your changes.
5. Do one of the following:
– Select the Send test mail check box and click OK.
– Click OK to complete the procedure.
Removing email recipients from the Operation application
1. Select > > Configure email recipients > .
All email addresses in the Operation application are displayed.
2. Select the email address(es) to remove.
3. Click Remove to complete the removal and then click OK.
9.4 Data point integration settings
Data point integration settings only displays under > Settings if a user role has
been granted access to both the List view core function and Tools.
The selections for Data point integration settings determine if data points from
monitored automation stations are automatically integrated to the Operation application
and how many BACnet objects are imported when data points are integrated.