Operating Instructions

General information
Target readers
7 | 80
Siemens
A6V11211557_enUS_b
Building Technologies
2019-01-15
1 General information
This section covers conventions used in the manual, how to access help, related
publications, and other information to help you use this manual.
Document use / request to the reader
Before using our products, it is important that you read the documents supplied with or
ordered at the same time as the products (equipment, applications, tools etc.) carefully
and in full.
We assume that persons using our products and documents are authorized and
trained appropriately and have the technical knowledge required to use our products
as intended.
Siemens assumes no liability to the extent allowed under the law for any losses
resulting from a failure to comply with the aforementioned points or for the improper
compliance of the same.
Quality assurance
These documents were prepared with great care.
● The contents of all documents are checked at regular intervals.
● Any corrections necessary are included in subsequent versions.
● Documents are automatically amended as a consequence of modifications and
corrections to the products described.
Please make sure that you are aware of the latest document revision date.
1.1 Target readers
This document is intended for users doing the following tasks:
● Operating Scheduler or Trends and acknowledging alarms.
● Changing system settings, making basic system updates and performing simple
service or maintenance tasks. This does not include BMS system commissioning.
● Trending values for troubleshooting.
● Performing energy monitoring through animated graphics that are associated with
gauges, bar graphs, meters, and so on.
● Monitoring the status of the system using system reports and exporting the data.