Operating Instructions

Scheduler
Modifying the Schedule default
40 | 80
Siemens
A6V11211557_enUS_b
Building Technologies
2019-01-15
5.2 Modifying the Schedule default
The Schedule default is the value to which the schedule controls the referenced object
when either of the following situations occurs:
● A switching point is not in control. This would happen on any day during the period
of time before the first switching point is scheduled to occur.
● A switching point’s value is set to Return to default. For more information, see the
switching point widget examples in the Using the expanded modification controls
[➙ 39] section.
Modifying the Schedule default
Use this procedure to modify the default value or setting for switching points that are
added to the schedule.
 A schedule is displayed in the work area.
1. Tap Options in the heading.
 The Options dialog box displays the current Schedule default.
2. Tap the drop-down list to enter a new default value (analog object) or select a new
default setting (binary or multistate object).
3. If the schedule should not attempt to control the referenced object(s) when a
switching point is not in control or when a switching point’s value is set to Return to
default, select Return to default in the drop-down list.
4. Tap OK to save changes to the database.