Operating Instructions

Alarms
Alarms tools
29 | 80
Siemens
A6V11211557_enUS_b
Building Technologies
2019-01-15
4.4 Alarms tools
Alarms tools are available to users with the appropriate role assignment.
4.4.1 Workflow for configuring alarm routing
This procedure configures alarm routing so that recipients only receive the information
that applies to them. For example, a selected list of recipients may only receive an
email for an alarm on weekends or during a specific timeframe.
Workflow step
1
Configuring email recipients
2
Configuring alarm routing
Prerequisite
Data points from the devices being monitored for alarms must be integrated to the
Desigo Control Point device.
① Configuring email recipients
1. Select > > Configure email recipients > .
2. In the Add email recipients dialog box, type one or more email addresses
separated by a comma.
3. Click Apply to save the email addresses.
4. If desired, select the Send test email check box to send a test email to the list of
recipients.
5. Click OK to complete the procedure.
② Configuring alarm routing
 Alarms is selected in the core function pane.
1. Select > > Configure alarm routing > .
2. Use the Table Configure alarm routing dialog box to make selections in the first
dialog box.
3. Click Next.
4. Use the Table Alarm filter dialog box to make selections in the second dialog box.
5. Click Apply to save your selections.
Possible next step: Integrating data points