Operating Instructions

Alarms
Alarms user interface
26 | 80
Siemens
A6V11211557_enUS_b
Building Technologies
2019-01-15
③
Details
Displays faults, alarms and unacknowledged events for the object.
④
Date/Time
Date and time of the alarm or event transition
⑤
Name
Name of the object in alarm, including building structure hierarchy.
If an alarm is received from a data point that has not been integrated, the name displays as Device
name/Object name.
⑥
Source
Device name/Object name.
⑦
Event state
The BACnet alarm state.
⑧
Priority
Alarm or event priority.
⑨
Message
The alarm message that was defined in the alarm definition.
⑩
Acknowledged date/time
Time and date that the alarm or event was acknowledged.
⑪
Acknowledged by
User name that acknowledged the alarm or event.
⑫
Acknowledge or Reset button (Tile view only)
Only displays if a user role has been granted access to acknowledge alarms and when an
acknowledgment or reset is required.
Additional alarm information
The following table outlines the alarm properties that are displayed when you click .
The properties displayed depend on the data point type.
Table 2: Information dialog box.
Property
Description
alarmState
The BACnet alarm state. For example, OFFNORMAL, HIGH_LIMIT,
LOW_LIMIT, FAULT.
alarmText
The alarm message that was defined in the alarm definition.
baAggregatedStateObject
deviceInstance
eventEnrollmentinstance
eventType
The BACnet alarm or event type. For example, OUT_OF_RANGE.
notifyType
The BACnet notification type of ALARM or EVENT.
objectidentifier
priority
The alarm or event priority
reliability
siteRefDis
Name of the highest level of the hierarchy where the object in alarm
resides.