Operating Instructions

Plant view
Commanding objects through a Plant view graphic
20 | 80
Siemens
A6V11211557_enUS_b
Building Technologies
2019-01-15
3.2 Commanding objects through a Plant view graphic
The Plant view and List view core functions provide the same options for
commanding objects. You can place objects Out-of-service or return them to In
service, release objects from Manual control, and command objects to a new value.
The following figure shows the Siemens sample graphic for controlling a room.
①
Object label
A label displays for each data point in the graphic. Click the label to display additional object
properties that are used for engineering graphics. Icons at the top of the label indicate:
● The type of BACnet object represented.
● Value quality – if the object is in Fault or in transition to a new value.
● Operating mode – if a data point has been overridden or placed out of service.
● Trend data collection status.
● Alarm state.
The present value of the data point displays at the bottom of the label.