User`s manual

Command Descriptions, Continued
“verbose” Command
This command controls the event buffer display’s “verbose” mode. When
verbose mode is on, the list command shows an expanded format for
captured frames:
Local> verbose on
local>list
MESSAGE NUMBER 502
IP DESTINATION 172.16.9.188
IP SOURCE 172.16.9.85
HW DESTINATION 01:02:03:04:05:06
HW SOURCE 01:02:03:04:05:06
TYPE 1234
LENGTH 82
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F
30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F
40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F
50 51
MESSAGE NUMBER 503
HW DESTINATION 01:02:03:04:05:06
HW SOURCE 01:02:03:04:05:06
TYPE 0024
MESSAGE NUMBER 504
IP DESTINATION 172.16.9.188
IP SOURCE 172.16.9.85
HW DESTINATION 01:02:03:04:05:06
HW SOURCE 01:02:03:04:05:06
TYPE 0024
LENGTH 32
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
MESSAGE NUMBER 505
HW DESTINATION 01:02:03:04:05:06
HW SOURCE 01:02:03:04:05:06
TYPE 0208
84 • Command Summary