User`s manual

Assigning an IP Address
Overview
Each individual hub board (“hub-half”) in the system must have a unique
IP address. This 32-bit number defines each DNH’s network ID and host
ID. The IP address must be assigned by the user before the unit is
network operational.
See Setting Network Address page
57, for instructions on how to enter
the IP address.
IP Address
The IP Address consists of a 32-bit number divided into four 8-bit fields.
Each field is expressed as a decimal number from 1 to 255 with each
field separated by periods. This is referred to as “dotted decimal”
notation. For example, 192.16.9.52 is an IP address.
How to Assign an IP
Address
Ask your network administrator to assign you an IP Address, or if the
DNH will be in a closed plant area and not connected to the Internet you
can select an address from Table 3-1.
192.165.0.1
192.165.0.2
192.165.0.3
192.165.0.4
192.165.0.5
192.165.0.6
192.165.0.7
192.165.0.8
192.165.0.9
192.165.0.10
192.165.0.11
192.165.0.12
192.165.0.13
192.165.0.14
192.165.0.15
192.165.0.16
192.165.0.17
192.165.0.18
192.165.0.19
192.165.0.254
192.165.1.254
192.165.2.254
192.165.3.1 - 192.165.3.254
Table 3-1: Available IP
Addresses
2000585-001 Data Communications Setup • 59