User Manual

2
Mounting the CZM-4
After the address is set, install the CZM-4 into the
MOM-4 module, being sure that the CZM-4 is firmly
seated in the card edge connector.
ELECTRICAL RATINGS
tnerruCeludoMCDV5evitcAAm01
tnerruCeludoMCDV42evitcA
Am081+Am54
enozevitcarep
tnerruCeludoMCDV42ybdnatSAm05
Initiating Circuits
Voltage range: 21.7-22.8 V unfiltered
full wave
Supervisory circuit: 4mA max
Alarm current: 180mA per zone max
INITIATING DEVICES
Up to 30 detectors, listed in Table 2 (except the
PBA-1191), may be used on a CZM-4 zone. Manual
fire alarm stations and smoke detectors can be
mixed on zones where local codes allow. Detectors
of different models are not to be mixed or matched
Figure 1
MOM-4 PC Board
2ELBAT
4-MZCROFSROTCETEDELBITAPMOC
rotceteDesaB
noitallatsnI
snoitcurtsnI
rebmuNtraP
*H3/3-IDS3-BD349180-513
*H3A/3A-IDS3-BD349180-513
*H3B/3B-IDPLI
3/I3-DA
I3-AS
432390-513
472690-513
‡*11-TD11-BD
TPDA-BD+S3-BD
924590-513
924590-513
†1911-ABP1911-BBP424590-513
*T3/3-EP*53-BD
PLI3-DA
PR3-DA
578090-513
432390-513
195680-513
*T11/11-EP11-BD
TPDA-BD+S3-BD
RP11/P11-DA
P11-AS
8
91490-513
891490-513
956590-513
472690-513
.1911-ABPtubepytynafosrotceted03otpuesuyaM*
.noitacifirevmralahtiwesutonoD‡
.)3erugiFeeS(enozrep1911-AB
PenoylnO†
on a system. Up to five waterflow switches and any
number of direct shorting thermal detectors also may
be used with each zone on the CZM-4. Only one
PBA-1191 may be used on a zone. The model
numbers listed are the UL compatibility identifiers.