User Manual

4
Siemens Schweiz AG
A6V11561295_en--_b
Building Products
2021-01-13
The frequency of the product inspection is subject to applicable local regulations. For more
information, refer to the maintenance documentation.
Safety measures
● Before handling, dismantling or transport, place the cylinder in safe position.
After an actuation
● Make the installation safe.
● Replace the cylinder with an identical cylinder.
Refer to the maintenance instructions to obtain detailed procedures.
Regulatory check
Depends on the current regulations in the country. Observe ADR regulation in case of road
transportation.
● Carry out periodic inspections in compliance with Siemens' instructions.