Commissioning Instructions

4G Dongle Setup
Supported devices
1
4 | 7
A6V12059208_en--_c
1 4G Dongle Setup
This guide describes the workflow on how to connect a 4G USB dongle to a
Connect X300 device.
Instructions are also applicable for the connection to a Connect X200 device. The
images shown are for reference only. The actual product and user interface may
vary.
1.1 Supported devices
Previous device types are still supported.
Due to cyber security reasons it is recommended to use network mode 4G only.
A minimum bandwidth of 1024 kbps (128 KB/s) is required. It is recommended to
verify the bandwidth via a network speed tool during installation.
Device type
Frequency band
Huawei E3372/E3372h-320
(High-speed 4G dongle)
● 4G (LTE): 1/3/7/8/20
(800/900/1800/2100/2600 MHz)
● 3G UMTS: 900/2100 MHz
● 2G GSM: 850/900/1800/1900 MHz
Alcatel IK40V-2AALDE1
(4G LTE category 4 USB modem)
● 4G (LTE): 1/3/5/7/8/20
(800/850/900/1800/2100/2600 MHz)
● 4G (LTE): 800/900/1800/2100/2600
MHz
● 3G HSPA+/HSPA/UMTS:
900/1800/2100 MHz
Verizon USB730L/MC730 USA
● 4G: LTE - LTE-U, CAT 6
US bands: B13/B4/B2/B5
Global bands: B3
Carrier aggregation: B13+B4,
B13+B2, B4+B2, B4+B4, B2+B2,
B2+B5, B4+B5
● 3G and lower: Quad band -
GPRS/EDGE
Quad band UMTS/HSPA
CDMA2000 1xRTT/EvDOrA
Huawei E3372/E3372h-
320
Alcatel IK40V-2AALDE1
Verizon
USB730L/MC730 USA