4G Dongle Setup A6V12059208_en--_c 2021-04-26 Smart Infrastructure
Edition notice Edition notice Technical specifications and availability subject to change without notice. This document may not be reproduced, disseminated to third parties or processed and its contents may not be used or disclosed without express permission. Noncompliance shall result in compensation for damages. All rights, including those resulting from a successful patent application and registration of a utility model or design patent, are reserved.
Cybersecurity disclaimer Cybersecurity disclaimer Siemens provides a portfolio of products, solutions, systems and services that includes security functions that support the secure operation of plants, systems, machines and networks. In the field of Building Technologies, this includes building automation and control, fire safety, security management as well as physical security systems.
1 4G Dongle Setup Supported devices 1 4G Dongle Setup This guide describes the workflow on how to connect a 4G USB dongle to a Connect X300 device. Instructions are also applicable for the connection to a Connect X200 device. The images shown are for reference only. The actual product and user interface may vary. 1.1 Supported devices Previous device types are still supported. Due to cyber security reasons it is recommended to use network mode 4G only.
4G Dongle Setup Installing dongle 1 1.2 Installing dongle Cyber security can only be ensured as long as the latest firmware version is installed. It is recommended to perform firmware updates manually. Follow the general installation steps below to setup the device. Images shown are based on device type Huawei E3372/E3372h-320. UI may differ depending on the chosen device type. 1. Connect 4G dongle to a local PC. The dongle is displayed as physical drive once connected. 2.
1 4G Dongle Setup Connecting dongle 1.3 Connecting dongle The USB dongle can be plugged into any USB port. It is recommended to use port X60. A connected WAN cable can be plugged in simultaneously. The dongle is set with higher priority and communication channel will be changed automatically once a connection is established. When the dongle is removed, WAN port will be activated again automatically. 1. Connect a LAN cable to X1P1 port on the Connect X300. 2.
4G Dongle Setup Troubleshooting 1 1.4 Troubleshooting Avoid IP address conflicts The USB dongles have a static IP address within a predefined IP address range. It is not possible to change the IP address of the dongle. Make sure to avoid an IP address conflict with the IP address assigned to WAN or LAN port. Examples: Huawei Alcatel Dongle IP address 192.168.8.xxx 192.168.1.xxx Default gateway 192.168.8.1 192.168.1.
