User Manual

Features
Connect X300 is a physical device that is the connecting point between the cloud and
controlled/monitored devices. This can include controllers, sensors, and actuators in the
building etc.
Application
The device integrates BACnet/IP or Modbus/TCP devices and systems as well as FS20 fire
panels.
It securely transmits data to the cloud over cabled networks or over mobile networks (e.g.
4G: With a router). 4G USB Dongle support is available in addition (see “Accessories”).
Functions
The Connect X300 provides two integration levels to connect devices to the cloud: System
integration (between the Connect X300 and the devices) and cloud integration (between the
Connect X300 and the cloud).
A broad range of devices can be integrated on the system level (Desigo, FS20, third-party
systems). It supports various protocols (BACnet, Modbus) and various physical media
(Ethernet, serial EIA-485 bus).
The device supports Ethernet and 4G on the cloud level via the MQTT protocol.
Technical design/mechanical design
Mechanical design
The device can be mounted on standard rails and walls.
1
Base plate
2
Cooling fins, aluminum
3
Connection: Power supply (DC 24 V=)
4
Main switch
5
Labeling of LED indicators on the front
6
LED indicators on the cover (light guides)
1 3 4 5 6