User Manual

EPD - Type II
Based on ISO 14021
A5W00059111 A 11.12.2018
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.
Legal Disclaimer: This declaration is for information purpose only.
Siemens Schweiz AG therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent
under the law.
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular
composition for a particular period.
The device is considered an electronic device for disposal in accordance with the European Guidelines and may not be
disposed of as domestic garbage.
● Dispose of the device through channels provided for this purpose.
● Comply with all local and currently applicable laws and regulations.
● Dispose of empty batteries in designated collection points.
Disposal
PCBAs (Printed Circuit Board
assembled)
Comments
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive, including the 4 phthalates added to
Annex II in 2015.
Regulation (EC) No. 1907/2006 (REACH)
The device contains the following substances of the candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the
Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) in concentrations above 0.1 % w/w. Contained REACH candidate
substances, including those which will become known at a later date, are listed on the delivery note.
4,4'-isopropylidendiphenol (Bisphenol A, BPA), CAS-Nr.80-05-7; Lead, CAS-Nr.7439-92-1
(Status according to the creation date of this document.)
The device is halogen-free with exception of:
PCB (TBBA)
Page 2/2