User Manual

Siemens AG 2003, \\Dellserver\users\admin\Ulysses Refres

h\E2\S_ULYR_Startup.fm

7Getting started

VAR Language: en; VAR issue date: 040604

right

page (7)

of Ulysses_Refresh SUG en2 short, A31008-H7103-M7-1-RC19 (30.11.2004, 12:26)

Getting started

Inserting the SIM card/

battery

The service provider supplies you

with a SIM card on which all the

important data for your line is

stored. If the SIM card has been

delivered in credit-card size, snap the

smaller segment out and remove

any rough edges.

Press the grooved area

1, then push

cover towards the front in the direc-

tion indicated by the arrow

• Place the SIM card in front of the

slot with the contact surface fac-

ing downwards. Then press the SIM

card slightly to push it in

(ensure that the chamfered corner

is in the correct position).

• Insert the battery sideways into

the phone

4, then press it down-

wards

5 until it engages.

• To remove, press the retaining tab

on the side of the battery, then lift

the battery out.

• Place the cover in position and

push it towards the front

6 until

it latches into place.

Additional information

Please switch off your phone before

removing the battery!

Only 3 V SIM cards are supported. Please

contact your service provider if you have an

older card.