Operating instructions

Commissioning (software)
2.7 Commissioning modes
Control Units CU240S
2-42 Operating Instructions (Compact), 04/2006, A5E00766042B AA
2SWLRQ3RUW
866RQ56
'W\SHFRQQHFWRU
ထ866RQ56
ထ352),%86
%23
GLUHFWO\ILWWHG
67$57(5
YLD3&
FRQQHFWLRQ
NLW
00&
0XOWL
0HGLD
&DUG
67$57(5
YLD68%'
FDEOH
56!56FRQYHUWHU
3&
FRQQHFWLRQ
NLW
Figure 2-9 Series commissioning interfaces
Warning
For series commissioning, all of the communication interfaces as well as also the digital and
analog interfaces are re-initialized. This results in a brief communications failure or causes
the digital outputs to switch.
Potentially hazardous loads must be carefully secured before starting a series
commissioning.
Potentially hazardous loads can be secured as follows before starting series commissioning:
• Lower the load to the floor, or
• Clamp the load using the motor holding brake.