Operating instructions

Communication
6.4 Communication via PROFIBUS
Control Units CU240S
154 Operating Instructions, 10/2007, A5E00766042B AC
P0927 Modification source for parameters
This parameter defines the interface through which parameters can be modified.
Bit Description Index
0 Fieldbus (PROFIBUS DP/PROFINET IO) 0: No 1: Yes
1 BOP 0: No 1: Yes
2 PC Connection Kit (STARTER) 0: No 1: Yes
3 RS485 (only CU240S) 0: No 1: Yes
The default setting for all bits is 1, i.e. parameters can be modified from all sources.